• PVC-U SURFACE MOUNTING BLOCK WITH 20MM ENTRY

    1. The inner and outer walls of the casing are smooth and the friction coefficient is small. It can reduce the resistance of wires and cables in the pipeline.
    2. High compression resistance, it can be installed in the concrete in the open or concealed way, and will not be damaged under pressure. Medium and heavy pipe series are suitable for concealed laying in the concrete.
    3. The casing has good impact resistance and heat resistance. During concrete pouring, the casing can withstand normal tamping impact without cracking, and will not soften and deform under the effect of concrete setting.
    4. The casing has good moisture resistance, acid and alkali resistance, will not rust, and is acid, alkali and oil resistant. All joints shall be bonded with PVC adhesive according to the regulations, which can prevent water from seeping into the pipe and has better moisture-proof effect. Therefore, it is suitable for use in corrosive environment.
    5. PVC has strong compression resistance, and can be installed in the concrete in an open or concealed manner, without being damaged by external pressure.
    6. PVC electrical casing is light in weight, convenient in handling and construction, which can save a lot of labor and material resources.

  • PVC-U TELSTRA BEND 90°

    It is used in normal indoor environment and places with high temp ture, dust, vibration and fire hazard. It can also be used in wet places. It shall not be used in a particularly humid place with acid, alkali, salt corrosion and explosion risk. The op ting ambient temp ture is – 15 ℃~+40 ℃. The threading pipe has excellent mechanical properties. Excellent corrosion resistance, high pressure resistance of threading pipe, and working pressure exceeding 2.5Mpa. The threading pipe has smooth surface, small fluid resistance, no scaling, and is not suitable for breeding microorganisms. Small thermal expansion coefficient, no shrinkage deformation. Traditional installation and connection mode. The epoxy coating on the threading pipe can effectively solve the corrosion of metal pipes caused by water conveyance, burial, acid, alkali and salt, and the service life can reach more than 50 years.

  • PVC-U THREAD REDUCER

    1. PVC electrical tube and wire tube have strong resistance to pressure, PVC threading tube series can withstand strong pressure, can be laid in the concrete exposed or concealed, and is not afraid of cracking under pressure.
    2. The wire tube is corrosion resistant, insect resistant, and PVC threading tube series has acid and alkali resistance. There is no plasticizer in the tube, so there is no pest.
    3. The wire tube has good flame retardancy. After the PVC threading tube series is burned on the flame, it can self extinguish and prevent the fire from spreading.
    4. The wire tube has strong insulation performance, can accept high voltage without being broken down, and can effectively prevent leakage and electric shock accidents.
    5. The PVC electrical pipe is easy to construct, and the PVC threading pipe is light – only 1/5 of the steel pipe is easy to bend. Inserting a section of bending spring provided by us into the pipe can manually bend at room temp ture.
    6. The investment of wire tube can be saved. Compared with steel pipe, PVC wire tube can greatly reduce the data cost and construction and installation cost.

Scroll to Top