0
X
  • No products in the list
0
X
  • No products in the list

Categories

PVC-U CORRUGATED CONDUIT GLANDS

It is used in normal indoor environment and places with high temp ture, dust, vibration and fire hazard. It can also be used in wet places. It shall not be used in a particularly humid place with acid, alkali, salt corrosion and explosion risk. The op ting ambient temp ture is – 15 ℃~+40 ℃. The threading pipe has excellent mechanical properties. Excellent corrosion resistance, high pressure resistance of threading pipe, and working pressure exceeding 2.5Mpa. The threading pipe has smooth surface, small fluid resistance, no scaling, and is not suitable for breeding microorganisms. Small thermal expansion coefficient, no shrinkage deformation. Traditional installation and connection mode. The epoxy coating on the threading pipe can effectively solve the corrosion of metal pipes caused by water conveyance, burial, acid, alkali and salt, and the service life can reach more than 50 years.

SKU: AED009 Category:

Add to quote

PVC-U INSULATING ELECTRICAL PIPE AND FITTINGS
PVC-U INSULATING ELECTRICAL PIPE AND FITTINGS, CORRUGATED CONDUIT GLANDS, AED009 , AS/NZS 2053,WATERMARK

Fusion Joints

HDPE piping systems can be joined with heat fusion welds. Heat fusion involves the heating of two HDPE surfaces then bringing them together to form a permanent, monolithic, leak-free system.

Unlike the fusion process developed for other plastics pipes, the fusion process for HDPE is proven and has been used by the natural gas industry for over 40 years. Approximately 95% of all gas distribution piping in  the United States is polyethylene pipe joined by heat fusion.

Fusing HDPE pipe is not difficult and personnel can be trained in the process.

Adaptability

In addition to joining HDPE with heat fusion, HDPE pipe can also be joined with Stab or Mechanical Fittings.

There are a wide range of these fittings available, specific to your pipe size and application.

Specification:

Model Number AED009 Material PVC-U
Description PVC-U CORRUGATED CONDUIT GLANDS Size 20、25MM
Standard ISO3633 Color Grey
Working Pressure     / Temperature Max 60°C / 140°F
Connection Socket & Thread Certificate WATERMARK

Related products

  • PVC-U JUNCTION BOX EXTENSION RING

    1. PVC electrical tube and wire tube have strong resistance to pressure, PVC threading tube series can withstand strong pressure, can be laid in the concrete exposed or concealed, and is not afraid of cracking under pressure.
    2. The wire tube is corrosion resistant, insect resistant, and PVC threading tube series has acid and alkali resistance. There is no plasticizer in the tube, so there is no pest.
    3. The wire tube has good flame retardancy. After the PVC threading tube series is burned on the flame, it can self extinguish and prevent the fire from spreading.
    4. The wire tube has strong insulation performance, can accept high voltage without being broken down, and can effectively prevent leakage and electric shock accidents.
    5. The PVC electrical pipe is easy to construct, and the PVC threading pipe is light – only 1/5 of the steel pipe is easy to bend. Inserting a section of bending spring provided by us into the pipe can manually bend at room temp ture.
    6. The investment of wire tube can be saved. Compared with steel pipe, PVC wire tube can greatly reduce the data cost and construction and installation cost.

    Add to quote

  • PVC-U SQUARE JUNCTION BOX WITH 3WAY

    1. The inner and outer walls of the casing are smooth and the friction coefficient is small. It can reduce the resistance of wires and cables in the pipeline.
    2. High compression resistance, it can be installed in the concrete in the open or concealed way, and will not be damaged under pressure. Medium and heavy pipe series are suitable for concealed laying in the concrete.
    3. The casing has good impact resistance and heat resistance. During concrete pouring, the casing can withstand normal tamping impact without cracking, and will not soften and deform under the effect of concrete setting.
    4. The casing has good moisture resistance, acid and alkali resistance, will not rust, and is acid, alkali and oil resistant. All joints shall be bonded with PVC adhesive according to the regulations, which can prevent water from seeping into the pipe and has better moisture-proof effect. Therefore, it is suitable for use in corrosive environment.
    5. PVC has strong compression resistance, and can be installed in the concrete in an open or concealed manner, without being damaged by external pressure.
    6. PVC electrical casing is light in weight, convenient in handling and construction, which can save a lot of labor and material resources.

    Add to quote

  • PVC-U CONDUIT TEE

    1. High strength, light weight, gen lly 1/6 of steel pipe and 1/10 of cement pipe. It is easy to transport and install without special equipment.
    2. Good flexibility, not easy to break, good seismic resistance and resistance to uneven settlement, greatly superior to the traditional cement pipe and asbestos pipe.
    3. Convenient construction: the socket connection is adopted, and the combined support and other accessories are convenient for pipe laying construction and installation, which can greatly shorten the construction period, and do not need to cast concrete protective layer. The ov ll project cost is low, and has significant economic benefits;
    4. The core temp ture of high voltage power cable with excellent heat resistance during normal op tion varies with the voltage. For example, when the temp ture of the cable core conveying 110kva voltage is transmitted to the bushing, the normal temp ture is 65 ℃, and the overload temp ture is 75 ℃. PV-C material has a thermal deformation temp ture of more than 93 ℃, which can adapt to the high temp ture environment, and it can work normally without deformation.
    5. Excellent electrical performance: flame-retardant, flame-retardant, volume resistivity ≥ 1.0 × 1011 ☊. m, with good insulation performance and safe use.

    Add to quote
Scroll to Top