-
PVC Fitting 90° Elbow Pn16
APAS Piping Systems, PVC Pipe Fitting ,90°Elbow, PN16(DIN8063) Socket, DVGW System: Plastic piping systems used for the supply of water under pressure up to and including 25 °C, used for human consumption and for general purposes as well as for drainage and sewerage water under
-
PVC Fitting Coupling Pn10
APAS Piping Systems ,PVC Pipe Fitting ,COUPLING, US003, PN10(ISO1452),Socket, CE System: Thedimensions of our fittings comply with ISO1452 standards, while many of our products meet other standards as well, including British, ASTM and Thai.
(1) Excellent physical properties. UPVC pipes and fittings are corrosion-resistant, high impact strength, small fluid resistance, no scaling, smooth inner wall, not easy to block, and meet the requirements of flame retardant properties of building materials, aging resistance, long service life. The indoor and buried service life can reach more than 50 years, and the outdoor use can reach 50 years.
(2) Light weight, easy to transport, store and install, which is helpful to speed up the project progress and reduce construction costs.
(3) Save construction costs. Using UPVC pipes and fittings is cheaper than using cast iron piping systems of the same specifications and is easy to maintain. -
PVC Fitting Coupling Pn16
APAS Piping Systems, PVC Pipe Fitting , COUPLING, PN16(DIN8063) Socket, DVGW Scope: Water mains and services buried in the ground. The piping network has high tensile strength, not easy to break and safe in work. Specification: This part of ISO 1452 covers a range of fitting sizes and
-
PVC Fitting End Cap Pn10
APAS Piping Systems ,PVC Pipe Fitting ,END CAP, US016, PN10(ISO1452),Socket, CE System: The dimensions of our fittings comply with ISO1452 standards, while many of our products meet other standards as well, including British, ASTM and Thai. PVC-U (Unplasticised polyvinyl chloride) is one of the…
-
PVC Fitting Female Adaptor M/f Pn16
APAS Piping Systems, PVC Pipe Fitting , FEMALE ADAPTOR MF, PN16(DIN8063) Thread, DVGW Scope: Conveyance of water above ground for both outside and inside buildings. Specification: Pipe and fittings are applicable to PVCU fittings and to joints with components of PVCU, other plastics
-
PVC Fitting Female Adaptor M/f Pn16
APAS Piping Systems, PVC Pipe Fitting , FEMALE ADAPTOR MF, PN16(DIN8063) Thread, DVGW System: EN ISO 1452 Plastics piping systems is applicable to fittings in piping systems intended for the supply of water under pressure up to and including 25 °C (cold water), intended for human consumption
-
PVC Fitting Female Adaptor Pn10
APAS Piping Systems ,PVC Pipe Fitting ,FEMALE ADAPTOR, US011, PN10(ISO1452),Socket, CE System: PVCPN10 (ISO1452) Pressure Pipe and Fitting System Durapipe PVC-U is a solvent welded, fully matched pipework system incorporating pipe, fittings and valves that is available in both imperial
PVC pipe features
(1). The surface hardness and tensile strength of the pipe are excellent, and the pipeline safety factor is high.
(2). It has good aging resistance and its normal service life can reach more than 50 years.
(3). The pipeline has excellent corrosion resistance to inorganic acids, alkalis, and salts, and is suitable for industrial sewage discharge and transportation.
(4). The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to block, and the maintenance workload is small. -
PVC Fitting Female Brass Coupling
1: Rigid PVC is one of the most widely used plastic materials. PVC material is an amorphous material
2: In actual use, PVC materials are often added with stabilizers, lubricants, auxiliary processing agents, pigments, impact agents and other additives.
3: PVC material has non flammability, high strength, weather resistance and excellent geometric stability.
4: PVC has strong resistance to oxidants, reducing agents and strong acids. However, it can be corroded by concentrated oxidizing acids, such as concentrated sulfuric acid and concentrated nitric acid, and is not suitable for contacting aromatic hydrocarbons and chlorinated hydrocarbons.
5: The melting temperature of PVC during processing is a very important process parameter. If this parameter is improper, it will lead to the problem of material decomposition.
6: The flow characteristics of PVC are quite poor, and its process range is very narrow. In particular, PVC materials with large molecular weight are more difficult to process (such materials usually need to add lubricant to improve flow characteristics), so PVC materials with small molecular weight are usually used.
7: Shrinkage of PVC is quite low, generally 0.2~0.6% -
PVC Fitting Female Brass Elbow
PVC glue product is a new type of one component, fully transparent solution glue. It is a special fully transparent PVC plastic glue product developed for removing transparent or white PVC plastic products that are difficult to stick. It can be used in the problem of mutual adhesion or cross bonding between plastics and plastics, plastics and metals, plastics and nonmetals.PVC glue has many advantages, such as room temperature curing, convenient operation, high bonding strength, fast positioning, high elasticity, soft adhesive film, non-toxic curing material, etc.
-
PVC Fitting Female Brass Tee
Convenient and reliable installation: notice hot melt connection is adopted, and a joint connection can be completed in a short time, which is convenient and time-saving.
The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the fluid conveying system is small.
Strong heat resistance: the working temperature of the conveying water is 70 ℃ for long-term use and 95 ℃ for short-term use. -
PVC Fitting Female Elbow Pn16
APAS Piping Systems， PVC Pipe Fitting ，Female Elbow， PN16(DIN8063) Thread， DVGW Scope: This series of fittings specifies the characteristics of
-
PVC Fitting Female Tee Pn16
APAS Piping Systems, PVC Pipe Fitting , FEMALE TEE, PN16(DIN8063) Thread, DVGW Specification: This part of ISO 1452 is also applicable to PVC-U flange adapters and to the corresponding flanges made from various materials. Pipe and fittings are applicable to PVCU fittings and to joints
-
PVC Fitting Male Adaptor Pn10
APAS Piping Systems ,PVC Pipe Fitting ,MALE ADAPTOR, US012, PN10(ISO1452),Socket, CE System: PVC-U (Unplasticised polyvinyl chloride) is one of the most popular thermoplastic materials used for pipework installations. Durapipe PVC-U is a solvent welded, fully matched pipework system
-
PVC Fitting Pipe Bracket Pn10
APAS Piping Systems ,PVC Pipe Fitting ,PIPE BRACKET, US007, PN10(ISO1452),Socket, CE System: PVCPN10 (ISO1452) Pressure Pipe and Fitting System The dimensions of our fittings comply with ISO1452 standards, while many of our products meet other standards as well, including British, ASTM
1. Good toughness, strong ductility, good impact resistance, wear resistance and cut resistance. 2. Good chemical resistance, acid and alkali resistance, oil resistance, corrosion resistance, and can resist most organic and inorganic substances. 3. Good processability, easy processing at low temperatures, and can be formed using a variety of shaping methods. -
PVC Fitting Reducing Coupling Pn16
APAS Piping Systems, PVC Pipe Fitting , REDUCING COUPLING, PN16(DIN8063) Socket, DVGW System: ISO 1452-3:2009 specifies the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVCU) for piping systems intended for water supply and for buried and above ground
-
PVC Fitting Reducing Elbow Pn10
APAS Piping Systems ,PVC Pipe Fitting ,REDUCING ELBOW, USE07, PN10(ISO1452),Socket, CE System: PVC-U (Unplasticised polyvinyl chloride) is one of the most popular thermoplastic materials used for pipework installations.
The main advantages of reducing elbows are as follows:
1. Connecting pipes of different sizes: The reducing elbow can smoothly connect pipes of different sizes, providing a fluid channel without resistance.
2. Reduce resistance loss: Compared with ordinary elbows, the use of reducing elbows can reduce pipeline resistance losses and make the flow more stable.
3. Uniform speed and pressure distribution: The internal design of the reducing elbow is reasonable, which makes the liquid distribution more uniform when passing through and reduces the generation of eddy current. -
PVC Fitting Reducing Elbow Pn16
APAS Piping Systems, PVC Pipe Fitting , REDUCING ELBOW, PN16(DIN8063) Socket, DVGW Specification: Pipe and fittings are applicable to components for the conveyance of water and waste water up to and including 45 °C. This part of ISO 1452 is applicable to the following types of
-
PVC Fitting Straight Tee Pn10
APAS Piping Systems ,PVC Pipe Fitting ,STRAIGHT TEE, UST01, PN10(ISO1452),Socket, CE System: The dimensions of our fittings comply with ISO1452 standards, while many of our products meet other standards as well, including British, ASTM and Thai.
1. This kind of pipe has very good compressive strength, and the resistance of the pipe fluid is very small, because the inner wall of the pipe is very smooth, and the inside of the pipe is not easily blocked during use. Compared with concrete pipes, the water transport capacity can be increased by 40%.
2. The water density of this kind of pipe is also very good. Whether it is connected by bonding or using a rubber ring, it has very good water tightness. -
PVC Fitting Tee Pn16
APAS Piping Systems, PVC Pipe Fitting , STRAIGHT TEE, PN16(DIN8063) Socket, DVGW Research Institute 1. CNAS ISO 17025 ACCREDITED LAB, be able to issue test report on Chinese standard with CANAS. 2. IAPMO RESEARCH AND TEST ,INC. ACCREDITED LAB , accredited to issue test reports on
-
PVC FITTINGS 90°ELBOW
APAS Piping Systems, PVC Pipe Fitting ,Type II, 90 ° ELBOW,US Ⅱ 003 ， Slip, CE Specification: System: Polyvinyl chloride (PVC) is one of the most broadly used thermoplastic materials, common to many industries. PVC is highly resistant to acids, alkalis, alcohols
PVC pipe features
1. The friction coefficient of the pipeline is small, the water flow is smooth, it is not easy to block, and the maintenance workload is small.
2. The material has a high oxygen index and is self-extinguishing. -
PVC FITTINGS BLANK FLANGE
1. It has good tensile and compressive strength: but its flexibility is not as good as other plastic pipes.
2. Low fluid resistance: PVC-U pipe wall is very smooth, and its resistance to fluid is very small. Its roughness coefficient is only 0.009. Its water delivery capacity can be 20% higher than that of cast iron pipe with the same pipe diameter, and 40% higher than that of concrete pipe.
3. Excellent corrosion resistance and drug resistance: PVC-U pipe has excellent acid resistance, alkali resistance, corrosion resistance, and is not affected by moisture and soil pH, so no anti-corrosion treatment is required for pipe laying.
4. Good water tightness: PVC-U pipes are installed with good water tightness, no matter by bonding or rubber ring connection.
5. Anti bite: PVC-U tube is not a nutrient source, so it will not be eroded by rodents. According to the test conducted by the National Health Foundation in Michigan, rats will not bite PVC-U pipes.
6. Performance test: curing time, shrinkage, splitting strength, tensile strength, peel strength, thermal stability, shelf life, release of harmful substances.
