-
Electrofusion Flange Adapter ( 2.0MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygiene and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
Electrofusion Flange Adapter (B) ( 2.0MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygiene and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
Electrofusion Flange Adapter( 1.6MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygiene and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
Electrofusion Flange Adapter(1.6MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygience and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
Electrofusion Reducer ( 2.0MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygiene and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
Electrofusion Reducer(1.6MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygiene and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
Electrofusion Reducing Tee ( 2.0MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygiene and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
Electrofusion Reducing Tee( 1.6MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygiene and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
Electrofusion Reducing Tee( 1.6MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygiene and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
Electrofusion Reducing Tee(1.6MPa)
High toughness and good seismic performance; The connection is reliable; Low density, light weight, easy to handle and install; Can resist a variety of chemical media corrosion; Excellent hydraulic performance, the wear resistance coefficient is only 0.009;Long service life, up to 50 years; Good hygience and environmental performance; Better resistance to slow crack growth(SCG) and rapid crack propagation(RCP).
-
End Cap Butt Welding Pe Fitting
Non-toxic: contains no heavy ingredients, won’t get dirty or get infected with bacteria; resisting corrosion due to chemical agents or electron chemical corrosion; Lower Installation Costs: Compared to metal piping systems, the light weight and ease of installation can cut installation costs by as much as 50%; Greater Flow Capacity: Compared to metal pipe, smooth internal walls result in lesser pressure loss and greater volume; longevity: 50 years or more with good use; Recycling and environmental protection
-
End Cap
HDPE Pipe Fitting System,Pipe and fittings shall be manufactured from virgin HDPE (High Density Polyethylene) compounds.
-
End Cap
APAS Piping Systems, PP Thread Fitting , End Cap , PT013 , (ENISO1587AS/NZS4129) , Watermark & WRAS More related products of PP THREAD FITTINGS TEE Production Process of PP THREAD FITTINGS TEE Company Introduction of PP THREAD FITTINGS TEE International Certificate of PP THREAD FITTINGS TEE. PP is a polymer formed by the addition polymerization reaction of propylene, referred to as polypropylene. Its specific gravity is between 0.9-0.91 grams per cubic centimeter, the shrinkage rate is between 1.0-2.5%, and the molding temperature is between 160-220°C. In addition, it has the characteristics of colorless, odorless, non-toxic, light weight, good toughness and good chemical resistance.
-
End Cap
APAS Piping Systems, III PP Compression Fitting , PP Compression End Cap , PTIII013 , WRAS System: Mechanical Compression Fitting (known as PP compression fittings) is a fitting that connect piping elements which require physical force to develop a seal or produce…
-
End Cap Socket Welding Pe Fitting
Non-toxic: contains no heavy ingredients, won’t get dirty or get infected with bacteria; resisting corrosion due to chemical agents or electron chemical corrosion; Lower Installation Costs: Compared to metal piping systems, the light weight and ease of installation can cut installation costs by as much as 50%; Greater Flow Capacity: Compared to metal pipe, smooth internal walls result in lesser pressure loss and greater volume; longevity: 50 years or more with good use; Recycling and environmental protection
-
End Plug
All UPVC Pipe and Fittings are manufactured in compliance with AS/NZS 1477, the Australian and New Zealand standard for PVC Pipe and Fittings.UPVC Pipe is manufactured from 100% virgin Unplasticised Polyvinyl Chloride compound, no reworked material are used. All pipes are produced under strict ISO9002 Quality Assurance
-
End Plug
APAS Factory price logo custom pvc pipe threaded Wholesale Plug End Sheath Insulated Dust Cap End Cap
-
End Plug
APAS PVC/UPVC/Pressure Pipe fittings NSF Certificate SCH80 End Plug of 1/2″-6″ for Professional China Plastic Manufacturer
-
End Plug L Type
All UPVC Pipe and Fittings are manufactured in compliance with AS/NZS 1477, the Australian and New Zealand standard for PVC Pipe and Fittings.UPVC Pipe is manufactured from 100% virgin Unplasticised Polyvinyl Chloride compound, no reworked material are used. All pipes are produced under strict ISO9002 Quality Assurance System.
-
Equal Tee
HDPE Pipe Fitting System,Pipe and fittings shall be manufactured from virgin HDPE (High Density Polyethylene) compounds.
Categories
- Valves
- Pressure
- PVC Pressure Pipes and Fittings PN10 (DIN)
- PVC Pressure Pipes Fitting TYPE II (NBR5648)
- PVC Pressure Pipes and Fittings PN16 (DIN8063)
- PVC pipes & thread fittings BS standard
- PVC Pressure Pipes And Fittings SCH40 (ASTM D2466)
- PVC SCH40 Pressure Fittings TypeII
- PVC Pressure Pipes And Fittings SCH80 (ASTM D2467)
- PVC Pressure Fittings (BS4346 BS1452)
- PVC Pressure Fittings JIS Standard
- PVC Pressure Pipes And Fittings (AS/NZS 1477)
- PVC Pressure Fittings With Gasket
- PP Compression Fittings (ENISO1587 AS/NZS4129)
- III PP Compression Fittings
- PP Thread Fittings
- HDPE Butt Welding & Socket Welding Fittings
- HDPE Electrofusion Fitting Series
- WATER & GAS
- For Hot and Cold
- DRAINAGE
- GUTTER AND FITTING
- Pipes and Fittings to Electricity
- Welder
- Supplementary Items