• 90° Female Thread Elbow

    All UPVC Pipe and Fittings are manufactured in compliance with AS/NZS 1477, the Australian and New Zealand standard for PVC Pipe and Fittings.UPVC Pipe is manufactured from 100% virgin Unplasticised Polyvinyl Chloride compound, no reworked material are used. All pipes are produced under strict ISO9002 Quality Assurance

  • 95° DEGREE ELBOW F+F

    PVC drainage pipe has small friction coefficient, smooth water flow, is not easy to block, less maintenance work, high oxygen index and self extinguishing.PVC drainage pipe can be connected by bonding method, which is simple in construction, convenient in opAPAStion and installation.The deformation affected by tempAPASture is small, 50% – 150% lower than that of similar pipes. Its thermal conductivity and elasticity are small, and its frost resistance is better than some metal pipes.The compressive strength and tensile strength are good, but the flexibility is not as good as other plastic pipes.
    Low fluid friction resistance: the PVC-U pipe wall is smooth and clean, and the fluid friction resistance is small. The surface roughness index is only 0.009, and the water working capacity is 20% higher than that of cast iron pipes with the same diameter, and 40% higher than that of concrete pipes.
    Excellent corrosion resistance and chemical resistance: PVC-U pipes have excellent acid resistance, alkali resistance and corrosion resistance, and will not be disturbed by the pH value of water and soil layers. Therefore, all anti-corrosion measures are not required when paving.
    Good water tightness: When PVC-U pipe is installed, it has excellent water tightness no matter whether it is connected by adhesive or rubber ring.

  • Adjustable dripper

    APAS Piping Systems, PP Thread Fitting , Adjustable dripper , PI001 , (ENISO1587AS/NZS4129) , Watermark & WRAS More related products of PP THREAD FITTINGS TEE Production Process of PP THREAD FITTINGS TEE Company Introduction of PP THREAD FITTINGS TEE International Certificate of PP THREAD FITTINGS TEE FAQ of…

  • ANGLE CONNECTOR WITH GASKET

    1. Pvc drainage pipe has good tensile and compressive strength, but its flexibility is not as good as other plastic pipes.
    2. The wall of PVC drainage pipe is very smooth, so the resistance of water flow is very small. Its water delivery capacity is 20% higher than that of cast iron pipe with the same pipe diameter, and the water delivery effect is very good.
    3. In addition, the corrosion resistance and drug resistance of pvc drainage pipe are also very good, with good acid and alkali resistance characteristics. It is not affected by moisture and soil pH, and has a long service life.
    4. Pvc drainage pipe also has good water tightness. this pipe can maintain good water tightness whether it is connected by adhesive or rubber ring.
    5. Pvc drainage pipe has good tensile and thermal stability, and can adapt to different environments.

  • APAS 1/2″-4″ CPVC SCH80 Double True Union Ball Valve

    APAS Valves, CPVC TRUE UNION BALL VALVE, DIN/ANSI/NPT/BSPT/JIS/BS STANDARD, HEAVY OR LIGHT TYPE,WITH COLOR BOX, CTB01, (ASTM F1970), NSF-pw & UPC System: CPVC valves System Valve pressure rating 150 psi at 73°F water non-shock full-port, Maximum service temperature 180°F, Full port, EPDM…

  • APAS 50 Year Warranty BS PVC UPVC THREAD PIPE FITTINGS REDUCING FEMALE ELBOW

    APAS Factory Supply 50 Year Warranty BS PVC UPVC THREAD PIPE FITTINGS REDUCING female elbow

  • APAS ASTM F439 full size CPVC Pressure pipes for hot and cold

    From ERA brand in China, ASTM F439 can be applied to hot and cold water pipes in sizes from 1/2 “to 6”.

  • APAS Brand HDPE/PE/Plastic Ball Valves For Water and Gas with double purge

    APAS Piping Systems,HDPE Fittings HDPE Pipe Fitting Manufacturer High Quality Ball Valve with Double Purge

  • APAS BRAND SCH40 ASTM D2466 NSF PVC PRESSURE PIPE FITTINGS 45° elbow

    APAS BRAND SCH40 ASTM D2466 NSF PVC PRESSURE PIPE FITTINGS 45 elbow

  • APAS Brand Standard PE/HDPE Electrofusion Ball Valves Fitting For Water and Gas

    APAS Piping Systems,HDPE Fittings HDPE Pipe Fitting Manufacturer High Quality Ball Valve with Double Purge

  • APAS PVC BS EN607/EN12200/EN1462 STANDARD GUTTER SQUARE RAIN PIPE

    1. The design of PVC falling water internal framework maintains the durability and hardness of the falling water system.
    2. The design of the two-part fixing clip makes the downpipe look beautiful and generous, and can be well fixed on any external wall facade.
    3. The design of protective mesh and circular inner wall reduces the times of decontamination and makes the dedusting convenient and fast.
    4. It has good toughness, good impact resistance at low temp ture, and can resist impact. The pressure on which the ladder rests, snow, and is not easy to twist or deform.
    6. UV resistance, good aging resistance, acid and alkali resistance, as new as ever.
    7. It is easy to cut and install without special tools.
    8. Mature formula technology can maintain the stability of product performance.
    9. The gutter cover is exquisitely made, and the components are connected in a reliable way of embedded and pumped to ensure that the system does not leak and the drainage is more smooth.
    10. The inner wall of the gutter is designed with small arc edges to prevent dirt accumulation and facilitate cleaning.

  • APAS PVC PN10 Pipe Fitting 90° Copper Thread Elbow with DVGW Certificate

    APAS Plastic/PVC PN10 Pipe Fitting 90° Copper Thread Elbow with DVGW Certificate

  • APAS Watermark Certificate Type II PP/HDPE Compression Fittings True Union Valve

    APAS Piping Systems, PP Thread Fitting , Compression True Union Valve , PT015 , (ENISO1587AS/NZS4129) , Watermark & WRAS More related products of PP THREAD FITTINGS TEE Production Process of PP THREAD FITTINGS TEE Company Introduction of PP THREAD FITTINGS TEE International Certificate of PP THREAD FITTINGS TEE FAQ of…

  • ARCHED POLY GRATE 125MM

    PVC-U pipe is made of sanitary grade polyvinyl chloride (PVC) resin as the main raw material, and added with appropriate amount of stabilizer, lubricant, filler, color enhancer, which is extruded by plastic extruder and molded by injection molding machine. The production of pipes and pipe fittings is completed through cooling, curing, shaping, inspection, packaging and other processes.It has excellent physical and chemical properties, chemical corrosion resistance, high impact strength, small fluid resistance, 30% increase in flow compared with cast iron pipes of the same diameter, aging resistance, long service life, and service life of not less than 50 years. It is an ideal material for building water supply and drainage. Light and durable, easy to install, effectively speeding up the project progress. The construction cost can be saved. Compared with cast iron pipes of the same specification, the construction cost can be greatly reduced.

  • ASTM D2466 SCH40 Standard pvc pressure pipe Pn10

    APAS Piping Systems, PVC Pressure Pipe, US001, PN10 (ISO1452), CE System: PVCPN10 (ISO1452) Pressure Pipe and Fitting System Scope: This series of fittings can match the standard ISO 1452. Specification: Pipe and fittings shall be manufactured from virgid PVC(polyvinyl chloride) vinyl compounds….

  • Barrel Union

    APAS AS/NZS 1477 Australia Watermark PVC Pipe Fittings Barrel Union

  • Brass Female Thread Bridge

    APAS PVC Pipe Thread Fittings Brass Female Thread Bridge

  • Brass Female Thread Reducing Tee F/F/F

    APAS 50 Year Warranty BS PVC UPVC THREAD PIPE FITTINGS Brass FEMALE THREAD REDUCING TEE F/F/F

  • BRASS THREAD FEMALE ELBOW

    1. CPVC pipes are mainly made of PVC-C resin with excellent heat resistance and insulation properties. CPVC products are recognized as green and environmentally friendly products, and their excellent physical and chemical properties are attracting more and more attention in the industry.
    2. The heat resistance temperature of CPVC pipe is 15 ℃ higher than that of ordinary UPVC double wall corrugated pipe, and it has sufficient strength.
    3CPVC material, because its chlorine content is significantly higher than PVC, its flame retardancy and smoke density index are significantly improved
    4CPVC pipe is light in weight, high in strength, simple in construction and laying method, convenient and fast in installation and connection, and good in connection and sealing performance.
    5CPVC pipe material is corrosion resistant, anti-aging and has a service life of more than 50 years.

  • BS standard plastic pipe fittings female threaded pvc reducing coupling F/F

    APAS Piping Systems, PVC Pipe Fitting,Female Reducing Coupling F/F,TPF002,BS STANDARD, CE System: Thread PVC pipes and fittings for cold water Scope: PVC fittings are resistant to corrosion and chemical attack from most acids, alkalis, salts, fungi and bacteria. Specification: PVC(polyvinyl…

  • BSPT PVC 90 Degree Male Thread Elbow With 1/2-inch W/Union

    APAS BSPT PVC Thread Fittings 90 Degree Male Thread Elbow With 1/2-inch

Scroll to Top