-
PVC Jis Flange
It is a flame retardant material with good chemical stability and low tensile crack internal force. At the same time, its material properties also include high strength, high stiffness and high hardness. The working temperature range is from minus 15 ℃ to 60 ℃. It can be bonded and welded.Strong corrosion resistance: It is most suitable for anti-corrosion equipment in chemical industry. Easy processing: easy to cut, weld and bend. High strength, high stiffness and high hardness; Good electrical insulation; Good chemical stability; Self extinguishing; Low water absorption; Easy to bond and paint. Low price.
-
PVC Male Union
Characteristic 1: Rigid PVC is one of the most widely used plastic materials. PVC material is a kind of non crystalline material.
Characteristic 2: PVC materials are often added with stabilizers, lubricants, auxiliary processing agents, pigments, impact agents and other additives in actual use.
Characteristic 3: PVC material has non flammability, high strength, weather resistance and excellent geometric stability.
Characteristic 4: PVC has strong resistance to oxidants, reducing agents and strong acids. However, it can be corroded by concentrated oxidizing acids, such as concentrated sulfuric acid and concentrated nitric acid, and is not suitable for contacting aromatic hydrocarbons and chlorinated hydrocarbons.
Characteristic 5: The melting temperature of PVC during processing is a very important process parameter. If this parameter is improper, it will lead to the problem of material decomposition.
Characteristic 6: The flow characteristics of PVC are quite poor, and its process range is very narrow. In particular, PVC materials with large molecular weight are more difficult to process (such materials usually need to add lubricant to improve flow characteristics), so PVC materials with small molecular weight are usually used.
Characteristic 7: The shrinkage of PVC is quite low, generally 0.2~0.6%. -
PVC Octagonal Compact Ball Valve
APAS Valves, PVC OCTAGONAL COMPACT BALL VALVE, UCB04, PN10 (F1970), NSF-pw & UPC Scope: These valves are ideal for the following applications: water parks, fountains, aquariums, light-duty chemical and waste water. Our PVC ball valves are not only durably and made from a heavy duty material -…The valve body has light weight, strong corrosion resistance, compact and beautiful appearance, light weight and easy installation, strong corrosion resistance, wide application range, sanitary and non-toxic material, wear resistance, easy disassembly, simple and easy maintenance.
-
PVC Octagonal Compact Ball Valves
APAS PVC octagonal compact ball valve Manufacture Normal Pressure Pvc Compact Ball Valve For Water Ind
-
PVC Oneway Faucet Type
1. It is small and light, easy to disassemble and repair, and can be installed at any position and angle.
2. Simple and compact structure, long service life
3. The control torque is small, labor-saving and light, achieving complete sealing, and zero leakage in water pressure and gas testing.
4. Wide range of applicable media and complete size.
5. Good adjustment performance.
6. The number of opening and closing tests is up to tens of thousands, and the service life is long.
7. Select different materials of parts and components, which can be applicable to various media. -
Pvc Quick Coupling Quick Connect Adapter Male X Compression
APAS Pvc Compression Quick Coupling Quick Adapter Quick Connect Adapter Male X Compression
-
PVC Single Union Ball Valve
APAS Valves, PVC SINGLE UNION BALL VALVE,USU01, PN10 (F1970), NSF-pw & UPC System: A quarter-turn of the handle fully opens or closes the valve for quick shutoff. Easy turn handle means no pliers or breakage while turning on/off, and it’s repla A quarter-turn of the handle fully opens or…
-
PVC Single Union Ball Valve III
APAS Valves, PVC SINGLE UNION BALL VALVE Ⅲ, USU03, PN10 (F1970), NSF-pw & UPC System: A quarter-turn of the handle fully opens or closes the valve for quick shutoff. Full port allowing maximum flow and minimum pressure drop or turbulence Scope: For use with distribution of pressurized…
-
PVC Spring Check Valve
Good mechanical and electrical properties, strong acid and alkali resistance, good chemical stability, but low softening point Suitable for making thin sheets, wire and cable insulation layers, seals.The melting temperature of PVC during processing is a very important process parameter. If this parameter is improper, it will lead to the problem of material decomposition.
-
PVC Three PCS Ball Valve
APAS PVC three PCS ball valve Free Sample Custom Support 1/2 – 2 Inch Plastic Female
-
PVC TRUE UNION BALL CHECK VALVE
APAS pvc UBC02 PVC TRUE UNION Ball Check Valve made in china Plastic Union Valve
-
PVC True Union Ball Valve III
APAS Valves, PVC TRUE UNION BALL VALVE Ⅲ, UTB03, PN10 (F1970), NSF-pw & UPC Scope: True union valves have a carrier that can be removed from the piping system when needed. Our true union ball valves are made from durable dark gray PVC and have an easy-to-grip red handle that turns with…
-
PVC Ts Flange
It is a flame retardant material with good chemical stability and low tensile crack internal force. At the same time, its material properties also include high strength, high stiffness and high hardness. The working temperature range is from minus 15 ℃ to 60 ℃. It can be bonded and welded.PVC material has non flammability, high strength, weather resistance and excellent geometric stability.
-
PVC Two Pcses Ball Valve
APAS Valves, PVC COMPACT BALL VALVE M/F, UCTB04, PN10 (F1970), NSF-pw & UPC System: Full port allowing maximum flow and minimum pressure drop or turbulence Easy turn handle means no pliers or breakage while turning on/off, and it’s replaceable! Specification: PVC valves shall be…
-
PVC Two Pcses Ball Valve With Stainless Steel Handle
APAS Valves,PVC Two Pcses Ball Valve With Stainless Steel Handle , UCB06, PN10 (F1970), NSF-pw & UPC Scope: Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C). These valves are ideal for the following applications: water
-
PVC Union
Characteristic 1: Rigid PVC is one of the most widely used plastic materials. PVC material is a kind of non crystalline material.
Characteristic 2: PVC materials are often added with stabilizers, lubricants, auxiliary processing agents, pigments, impact agents and other additives in actual use.
Characteristic 3: PVC material has non flammability, high strength, weather resistance and excellent geometric stability.
Characteristic 4: PVC has strong resistance to oxidants, reducing agents and strong acids. However, it can be corroded by concentrated oxidizing acids, such as concentrated sulfuric acid and concentrated nitric acid, and is not suitable for contacting aromatic hydrocarbons and chlorinated hydrocarbons.
Characteristic 5: The melting temperature of PVC during processing is a very important process parameter. If this parameter is improper, it will lead to the problem of material decomposition.
Characteristic 6: The flow characteristics of PVC are quite poor, and its process range is very narrow. In particular, PVC materials with large molecular weight are more difficult to process (such materials usually need to add lubricant to improve flow characteristics), so PVC materials with small molecular weight are usually used.
Characteristic 7: The shrinkage of PVC is quite low, generally 0.2~0.6%. -
PVC Van Stone Flange
The flow characteristics of PVC are quite poor, and its process range is very narrow. In particular, PVC materials with large molecular weight are more difficult to process (such materials usually need to add lubricant to improve flow characteristics), so PVC materials with small molecular weight are usually used.The corrosion resistance and drug resistance are excellent, and the pipeline is not affected by the moisture and soil pH, so no anti-corrosion treatment is required when laying the pipeline
-
PVC WATER ANGLE VALVE
The valve body is light in weight, strong in corrosion resistance, compact and beautiful in appearance, easy to install, strong in corrosion resistance, wide in application, sanitary and non-toxic in material, wear-resistant, easy to disassemble, and easy to maintain. By introducing the raw material requirements, design requirements, manufacturing requirements, performance requirements, test methods, system application requirements and the relationship between operating pressure and temperature in the international standards for plastic PVC valve products and test methods, we can understand the basic quality control requirements for plastic PVC valves, such as sealing test, torque test and fatigue strength test.
-
Swing Check Valve
APAS factory direct by ball structure Best-selling white pvc check valve
-
TRUE UNION SPRING CHECK VALVE
APAS Valves, TRUE UNION SPRING CHECK VALVE, UTS01, PN10 (F1970), NSF-pw & UPC Scope: These valves are ideal for the following applications: water parks, fountains, aquariums, light-duty chemical and waste water. Our PVC ball valves are not only durably and made from a heavy duty material -…
